Here is the procedure Flash stock or custom rom rom using SP Firmware Flash tool. Before performing the flashing procedure. first download and install the drivers on your computer operation system Windows.

For driver Download

Before Flashing make sure the battery charged 40-50 percent in order to avoid the flashing process fails because of lack of battery power

For SP Flashtool Download

How to Flash using SP Flashtool :
  1. Download and install Usb driver in your computer
  2. Download extrack SP flashtool and Stock Firmware accordance with the type of your android
  3. Turn off and remove the battery for about 10 seconds and plug it again
  4. Open SP Flashtool.exe 
     
  5. Select scatter loading in SP Flashtool and navigate to stock firmware has been downloaded and select scatter-android
  6.  
    After selecting scatter android waiting SP Flashtool prepare files or loading run
  7. Click Download on the SP Flashtool at top left and choose the download mode in the bottom
  8. On the condition turn off, Connect Devices You use Usb Cable in the computer while holding down the volume down or volume up and let the computer detect the usb driver to loading on SP Flashtool running. and let the process.
  9. Once the process is running about 10 minutes Flashtool will be completed with a green stain marks success
  10. Close SP Flashtool and disconnect your phone from the computer. Relive your mobile phone. And congratulations Flashing success
  • After Flashing successful initial loading your android is rather long. But do not worry Android you will return to normal as new
أحدث أقدم

Post a Comment

إرسال تعليق